Quick answer: in Raleigh, Angi's spring replacement guide (updated July 2026) puts the average at $246, with a typical range of $147–$344. Replacing both springs, high-cycle springs, heavy doors, conversions, and after-hours visits cost more.
Published price ranges
| Source | What it covers | Typical range |
|---|---|---|
| Angi, Raleigh spring replacement guide (updated July 2026) | Spring replacement, Raleigh | $246 average; $147–$344 |
| Angi, Raleigh spring replacement guide (updated July 2026) | Springs for one garage door | $150–$350 |
| Angi, Raleigh spring replacement guide (updated July 2026) | Springs for two garage doors | $275–$425 |
| Angi, Raleigh spring replacement guide (updated July 2026) | Extension-to-torsion conversion | $400–$800 |
| Angi, national spring replacement guide (updated July 2026) | Spring replacement, U.S. | $250 average; $150–$350 |
| HomeBlue, Raleigh (published Sept. 2022) | Spring replacement, parts and labor | $200–$330 |
| HomeAidPros, Raleigh (2026; based on national averages) | One torsion spring | $200–$350 |
| HomeAidPros, Raleigh (2026; based on national averages) | Both torsion springs | $250–$500 |
| HomeAidPros, Raleigh (2026; based on national averages) | Extension springs, per pair | $150–$300 |
Third-party estimates, not quotes from Raleigh Garage Door SOS or its partner companies. The HomeBlue figure is older and HomeAidPros notes its figures are based on national averages, so treat both as rough context.
Torsion vs. extension springs
Torsion springs sit on a bar above the door and twist to store energy. HomeAidPros' figures put torsion springs toward the higher end, and HomeBlue describes torsion as the top of its range. Angi estimates they last about 8–15 years.
Extension springs run along the side tracks and stretch as the door closes. Angi notes they're common in Raleigh homes. They're often less expensive to replace, and Angi estimates they last about 7–12 years. Each one should have a safety cable.
Converting from extension to torsion costs $400–$800 in Raleigh, according to Angi, and Angi says a conversion takes four hours or more. Ask whether it's worth it for your door. Torsion vs. extension springs
One spring or both?
If your door has two springs and one breaks, the other one is the same age and has the same wear. Angi recommends replacing both at once to keep the door balanced. Replacing both costs more today, but it can save you a second service call when the other spring goes. Ask for both prices.
What else affects the price
- High-cycle springs. They cost more up front and last longer.
- Door weight and size. Heavy, insulated, wood, or double-wide doors need heavier springs.
- After-hours or weekend visits. Angi's Raleigh guides note emergency calls cost more.
- Collateral damage. Cables, drums, or rollers damaged when the spring broke.
- Labor. Angi puts Raleigh garage door labor at $70–$110 per hour. A simple spring replacement usually takes an hour or two.
- Older, smaller garages. Angi notes older, smaller garages in historic neighborhoods can raise the cost.
What a fair quote includes
- The number and type of springs (torsion or extension) and their cycle rating
- Whether both springs are being replaced, and the price for one vs. both
- Any other parts, such as cables, drums, rollers, or bearings, listed separately
- Trip, service-call, or after-hours fees
- The warranty on parts and on labor
- A total price before work starts
For the full picture on other repairs, see the Raleigh garage door repair cost guide. Need a spring replaced now? Request broken spring repair.
Frequently asked questions
Why do quotes for the same spring job vary so much?
Spring size and quality (standard vs. high-cycle), one spring vs. two, the door's weight, the time of day, and whether other parts like cables or drums also need work all change the price. A written, itemized quote makes comparison easier.
Is a high-cycle spring worth it?
If you use the garage as your main entrance, often yes. HomeAidPros' Raleigh page describes standard torsion springs as rated for about 10,000 cycles, and high-cycle springs at 25,000–50,000. Ask for both prices.